Gnu 4 C3 Snowboard


£240.95 £534.99 (Save 55%)
Choose size
  • 153cm 19SN011-NONE-Mul £240.95

    Out of stock

  • 156cm 19SN011-NONE-Mul £240.95

    Despatched immediately

  • 159cm 19SN011-NONE-Mul £240.95

    Despatched immediately

  • 162cm 19SN011-NONE-Mul £240.95

    Out of stock

Product Sizing Chart



Item code: 255834

  • Snowboard Type: All mountain board with a freestyle focus.
  • Rider Level: Best suited to intermediate riders.
  • Profile: C3 is a hybrid between a mild rocker and camber for an aggressive ride.
  • Shape: Directional board which a 1" setback.
  • Flexibility: Medium to firm flex, rated 6-7/10. The boards get slightly stiffer as the length increases.
  • Board Construction: G2 ECO
  • Core: The wood in this core has been harvested using sustainable methods. Using a blend of aspen and paulownia.
  • The core is symmetrical between the toes/ heel and nose/ tail.
  • Base: Sintered base.
  • Fiberglass: Tri-Ax/ Bi-Ax.
  • Topsheet: Eco-Sublimated bio bean top.
  • Sidewalls: Durable UHMW.
  • Edges: Magne-traction serraated edge.


Length (cm)Nose/Tail Width (cm)Waist Width (cm)Rider Weight (kg)
15329.3/ - 81.6
15629.6/ 29.525.349.8 - 95.2
15929.8/ 29.725.558.9 - 108.8
16230.2/ 30.125.763.5 - 122.4


The 4 board is the perfect all-rounder snowboard which charges all over the mountain and really pops in the park. With a freestyle focus you can get creative on all terrain. The 4 is a directional shape board with a 1” set back, this gives the nose a little extra length for float in powder. Whilst the C3 camber profile gives you aggressive carving and improved control. Mild rocker in the centre makes the board easier to manoeuvre and gives you a more forgiving ride. Plus, camber on the outside of the bindings gives you pop in the nose and the tail and a more playful feel under the board.

The 4 snowboard will keep you up to speed with the quickest men on the mountain thanks for the sintered base, which retains wax well and is highly durable. The sintered base is one of the fastest bases as its granules are compressed under pressure and heat, making it slighter harder to maintain. A GNU board wouldn’t be a GNU board unless it features Magne-traction edges. These are serrated along both the heel and toe to give you the superb bite into the hardpack snow and ice. These edges improve your edge hold to give you increased confidence when riding multiple terrain.

Lib-Tech boards are made in the Mervin factory in the USA. This factory is the most environmentally friendly factory which is powered with wind and water. The materials have carefully been selected to create an eco-board, made using renewable wood, low voc resin and bio topsheet. During the process of making the snowboard the Mervin factory uses water-based inks and sublimation. Plus, the final coating is no toxic, so it doesn’t run into our water streams and cause damage to the environment. It’s evident that climate change is having an impact on the mountain environment, so with a Mervin factory board to can reduce your carbon footprint whilst still enjoying a well man board which is going to give you a fun ride down the mountain.

Snowboard Profile Hybrid
Snowboard Shape Directional
Snowboard Type All Mountain
Sustainability Energy Efficient
Reduced Waste
Non Toxic

Product Sizing Chart

Length (cm)

By entering your email address above you explicitly consent for us to hold your data in accordance with our Privacy Policy