Snowboard Type: All mountain board with a freeride focus.
Rider Level: Best suited to intermediate riders.
Profile: C3 is a hybrid between a mild rocker and camber for an aggressive ride.
Shape: Directional board which a 1" setback.
Flexibility: Medium to firm flex, rated 6-7/10.
Board Construction: G1 ECO
Core: The wood in this core has been harvested using sustainable methods. Using a blend of aspen and paulownia.
The core is symmetrical between the toes/ heel giving you even flex.
Base: Eco-sublimated extruded base.
Fiberglass: Tri-Ax/ Bi-Ax.
Topsheet: Eco-Sublimated poly top.
Sidewalls: Durable UHMW.
Edges: Magne-traction serraated edge.
Nose/Tail Width (cm)
Waist Width (cm)
Rider Weight (kg)
49.8 - 95.2
54.4 - 99.7
58.9 - 104.3
63.5 - 113.4
Get the feeling of flying with the antigravity all mountain freeride board, this board is packed full of fun so you enjoy the ride. The Antigravity has a directional shape with a 1” setback, this increases the length of the nose to give it extra lift and float in powder. The profile is built for aggressive power riding and increases your control and precision. Mild rocker in-between the feet gives the board a skate like feel and more forgiving ride. Full camber on the outside of the bindings give you lots of pop in the nose and tail, plus quicker edge to edge transitions. This aggressive profile with a medium to firm flex makes the board highly responsive, best suited to an intermediate to advanced rider.
The Antigravity will have you flying down the mountain with its ECO extruded base. This base is fast and easy to maintain. A GNU board wouldn’t be a GNU board unless it features Magne-traction edges. These are serrated along both the heel and toe to give you the superb bite into the hardpack snow and ice. These edges improve your edge hold to give you increased confidence when riding multiple terrain.
Lib-Tech boards are made in the Mervin factory in the USA. This factory is the most environmentally friendly factory which is powered with wind and water. The materials have carefully been selected to create an eco-board, made using renewable wood, low voc resin and bio topsheet. During the process of making the snowboard the Mervin factory uses water-based inks and sublimation. Plus, the final coating is no toxic, so it doesn’t run into our water streams and cause damage to the environment. It’s evident that climate change is having an impact on the mountain environment, so with a Mervin factory board to can reduce your carbon footprint whilst still enjoying a well man board which is going to give you a fun ride down the mountain.
All Mountain Freeride
Energy Efficient Non Toxic Reduced Waste
Product Sizing Chart
Subscribe to Surfdome