Lib Tech

Lib Tech Cold Brew C2 Snowboard

Multicolour

£307.45 £409.99 (Save 25%)
Choose size
  • 149cm 19SN028-NONE-Mul £307.45

    Out of stock

  • 153cm 19SN028-NONE-Mul £307.45

    Out of stock

  • 157cm 19SN028-NONE-Mul £307.45

    Out of stock

  • 161cm 19SN028-NONE-Mul £307.45

    Despatched immediately

Product Sizing Chart

Colours

Information

Item code: 255229

Features:
  • Snowboard Type: All mountain freeride which is suitable for park, resort and back country.
  • Rider Level: best suited to an intermediate to advanced rider.
  • Profile: C2 banana technology, this hybrid profile is made up of rocker inbetween your feet with camber either side. This gives you precision riding on the slopes and float in powder.
  • Shape Directional.
  • Flex Medium flex with a rating of 5- 6.5/ 10. The boards get slightly stiff as they get longer.
  • Board Construction: OP construction. This construction gives you a strong board which remains lightweight.
  • Core: 75% Aspen and 25% paulmownia
  • Base: Eco subllimated TNT, this base is easy to maintain and hold wax well.
  • Fiberglass: Tri-Ax/ Bi-Ax glass. This gives the board stiffer sections to drive power and more flexible sections for torsional twist.
  • Top Sheet: Eco subllimated poly top
  • Sidewalls: Birch sidewalls internally run along the length of the toe and heel edge, outside of the birch runs UHMW sintered sidewalls. Whilst UHMW at the tip and tail increase impact deflection.
  • Edges: Magne-Traction edges are serrated to improve your edge hold, giving you better bite in icy conditions.
Length (cm)Nose/ Tail Width (cm)Waist Width (cm)Rider weight (kg)
 14929.5/ 29.2 25.638+ 
 15329.7/ 29.3 25.740+
 15730.4/30 26.245.3+
 16130.8/ 30.4   26.545.3+ 

 The weight guide is low as these are the minimum weight recommended. 



The Cold Brew board is an all-terrain board which performs in both the back country and freestyle. The Cold brew uses a C2 profile, which is a hybrid between rocker and camber to create the perfect balance. The rocker helps to give the board when gliding over powder to powering through crud. Whilst the camber gives your better edge control and stability when going fast and straight. The added camber gives the board pop in the nose and tail, ideal for park sessions and jibbing days.

When a board comes into contact with features it’s bound to get knocked around a bit, so the Cold Brew has a low maintenance base, sintered sidewalls and impact deflection at the nose and tail. Whether you’re a park rat or big mountain rider, the Magne-Traction edges will give you the confidence to ride any terrain knowing that they won’t slip out. These edges slice through ice to give you better edge hold.

Lib-Tech boards are made in the Mervin factory in the USA. This factory is the most environmentally friendly factory which is powered with wind and water. The materials have carefully been selected to create an eco-board, made using renewable wood, low voc resin and bio topsheet. During the process of making the snowboard the Mervin factory uses water-based inks and sublimation. Plus, the final coating is no toxic, so it doesn’t run into our water streams and cause damage to the environment. It’s evident that climate change is having an impact on the mountain environment, so with a Mervin factory board to can reduce your carbon footprint whilst still enjoying a well man board which is going to give you a fun ride down the mountain.

   
Snowboard Profile Hybrid
Snowboard Shape Directional
Snowboard Type All Mountain
Freeride
Sustainability Energy Efficient
Non Toxic
Reduced Waste

Product Sizing Chart

Length (cm)
149cm
153cm
157cm
161cm

By entering your email address above you explicitly consent for us to hold your data in accordance with our Privacy Policy