Lib Tech

Lib Tech Dynamo C3 Snowboard

Multicolour

£279.45 £429.99 (Save 35%)
Choose size
  • 153cm 19SN048-NONE-Mul £279.45

    Out of stock

  • 156cm 19SN048-NONE-Mul £279.45

    Out of stock

  • 159cm 19SN048-NONE-Mul £279.45

    Out of stock

  • 162cm 19SN048-NONE-Mul £279.45

    Despatched immediately

Product Sizing Chart

Colours

Information

Item code: 255233

Features:
  • Snowboard Type: All mountain freeride which is suitable for resort and back country.
  • Rider Level: best suited to an intermediate to advanced rider.
  • Profile: C3 banana technology, this hybrid profile is made up of mild rocker inbetween your feet with camber either side. This gives you a aggrssion control and power.
  • Shape: Directional with a slight taper in the nose.
  • Flexibility: Medium flex, rated 5-6.5/10. The board get slightly stiffer the longer the length.
  • Board Construction: OP construction. This construction gives you a strong board which remains lightweight.
  • Core: 75% Aspen and 25% paulmownia
  • Base: Eco subllimated TNT, this base is easy to maintain and hold wax well.
  • Fiberglass: Tri-Ax/ Bi-Ax glass. This gives the board stiffer sections to drive power and more flexible sections for torsional twist.
  • Top Sheet: Eco subllimated poly top
  • Sidewalls: Birch sidewalls internally run along the length of the toe and heel edge, outside of the birch runs UHMW sintered sidewalls. Whilst UHMW at the tip and tail increase impact deflection.
  • Edges: Magne-Traction edges are serrated to improve your edge hold, giving you better bite in icy conditions.

Length (cm)Nose/ Tail Width (cm)Waist Width (cm)Rider weight (kg)
 15329.3/ 2925.243+
 15629.7/ 29.425.550+
 15930/ 29.725.758.9+
 16230.3/ 2025.868+

 The weight guide is low as these are the minimum weight recommended. 



The Dynamo snowboard is great if you’re looking for an explosive all mountain board with a freeride focus. The directional shape and tapered nose give you a nose that’s wider and longer for extra lift and float in powder. A medium to firm flex combined with Tri-Ax fiberglass makes this a responsive board which is ideally suited for intermediate to advanced riders as it’s less forgiving.

The C3 profile is a hybrid between camber and rocker to create an aggressive ride. The mild rocker in-between the bindings gives the Dynamo float over powder. Whilst the camber on the outside of the binding drives power and pop for a playful ride. The camber also gives you quicker edge to edge transition and edge hold. This profile gives you maximum control for precision riding. The profile on the Dynamo works across all terrain types, however if your focus is speed, this board still performs. The base on this board is fast, retains wax well and is easy to maintain if damaged. To give you confidence in your board and skills the Dynamo uses Lid-Techs Magne-traction to bite into hardpack snow and ice. This feature prevents you from slipping out and puts you in control.

Lib-Tech boards are made in the Mervin factory in the USA. This factory is the most environmentally friendly factory which is powered with wind and water. The materials have carefully been selected to create an eco-board, made using renewable wood, low voc resin and bio topsheet. During the process of making the snowboard the Mervin factory uses water-based inks and sublimation. Plus, the final coating is no toxic, so it doesn’t run into our water streams and cause damage to the environment. It’s evident that climate change is having an impact on the mountain environment, so with a Mervin factory board to can reduce your carbon footprint whilst still enjoying a well man board which is going to give you a fun ride down the mountain.

   
Snowboard Profile Hybrid
Snowboard Shape Directional
Snowboard Type All Mountain
Freeride
Sustainability Non Toxic
Energy Efficient
Reduced Waste

Product Sizing Chart

Length (cm)
153cm
156cm
159cm
162cm

By entering your email address above you explicitly consent for us to hold your data in accordance with our Privacy Policy