Lib Tech

Lib Tech Dynamo Snowboard Snowboard

Multi

£494.95

Free UK delivery on orders over £30

Order by 9pm for Next Day Delivery

Extended free returns until 15th Jan 2023

Choose size
  • 153 cm 22SN043-NONE-Multi £494.95

    Despatched immediately

  • 156 cm 22SN043-NONE-Multi £494.95

    Out of stock

  • 156 cm Wide 22SN043-NONE-Multi £494.95

    Despatched immediately

  • 159 cm 22SN043-NONE-Multi £494.95

    Despatched immediately

  • 159 cm Wide 22SN043-NONE-Multi £494.95

    Out of stock

Product Sizing Chart

Colours

Information

Item code: 405652

The Dynamo snowboard is a dreamy camber directional board built for all terrain riding with freestyle capacity. The mild taper combined with the relaxed entry directional nose enables you to float through the powder and smash through the crud. The unique profile blends mild rocker in the centre of the board with camber underfoot to give you great control whilst carving in all conditions and increases your stability. Thanks to Magne-Traction edges, this board bites into the hard pack to give you confidence when making turns. The Dynamo board will have you racing your mates down the mountain, and winning due to a super fast eco sublimated TNT base. Its no surprise that the Dynamo is a favourite of both Austen Sweetin and Phil Hansen.

Features:
  • Terrain Type: All-Mountain
  • Ability Level: Intermediate to advanced
  • Flex: Medium to firm
  • Shape: Directional with a 1" setback
  • Wide width option
  • Profile: C3 Camber banana technology
  • Original Power Construction:
  • Core: 75% Aspen and 25% Paulownia
  • Triax and Biax fiberglass
  • Topsheet: Eco Sublimate Poly Top with a textured finish
  • Base: ECO Sublimated TNT base
  • Sidewalls: Birch internal sidewalls, UHMW sintered sidewalls and UHMW tip/tail impact deflection
  • Edges: Magne-Traction
  • ECO: Mervin Made is a super eco-friendly factory creating boards with zero hazardous waste, eco materials, and water based sublimation and inks
  • Art By: Mike Parillo

Medium to firm flex: This flex level is perfect for all mountain snowboarding as it provides a balance between response and forgiveness. Ideally suited for intermediate boarders who have already mastered the basics of boarding and feel confident on the slopes

Directional Shape: This shape is created through a 1" setback and a slightly tapered tail, increasing the volume of the nose for additional float in power whist naturally setting your body weight towards the tail to help it sink.

Wide width options: Increased width on the waist of the snowboard is great for guys with larger sized feet, preventing toe drag, improving control and performance

C3 Camber Profile: Built for more aggressive riding this profile features mild rocker between your bindings and camber underfoot. This combination gives you board full contact with the snow, resulting in better control with a range of conditions. Rocker in the centre adds carve and provides great edge hold whilst the camber adds pop and stability.

Original Power construction: The OP construction is built with the environment in mind whilst creating a lightweight yet strong board

Aspen and Paulownia core: The core is mainly made with Aspen making up 75% whilst the other 25% is made up of two paulownia beams which run the full length of the board. This combination creates a lightweight and tough core

Triax and Biax fiberglass: Biax fiberglass increases the durability of the board, without impacting the flex. Triax fiberglass increases the torsional stiffness of the board adding response and durability

Eco Sublimated TNT base: This base is low maintenance, if you pick up any dings or gauges this base is quick, easy and cheap to repair. The base retains wax well to help you glide over sticky snow and flats

Sidewalls: Internal Birch sidewalls run along the length of the board along the toe and heel edge whilst UHMW sintered sidewalls run along the outside. These sidewalls increase the strength and response of the board.

UHMW tip and tail deflection: UHMW within the nose and tail deflect impact for a smoother ride

Magne-Traction Edges: These edges are designed to give you maximum grip on all snow conditions including ice, mimicking the design of a serrated knife several serrated sections along the edge bite into the snow

Eco Manufacturing: All Lib-Tech boards are made in the USA within the Mervin factory. This is a legendary factory designed to be eco friend, running on wind and waterpower. Each board is made with carefully selected materials such as renewable wood, bio topsheets and low voc resin. All inks and sublimation used on the board is water based, taking harmful toxins away from the snowboard process. These high quality boards give you all the performance on the mountain whilst reducing your carbon footprint



Snowboard size guide

Length (cm)Nose Width (cm)Waist Width (cm) Tail Width (cm)Rider Weight (kg)Setback (cm) 
15329.325.229.045+2.5
15629.725.529.450+ 2.5
156 Wide30.726.530.455+ 2.5
15930.025.729.760+ 2.5
159 Wide31.0 26.730.7 65+ 2.5

 



Snowboard Profile Camber
Snowboard Shape Directional
Snowboard Type All Mountain

Product Sizing Chart

Length (cm)
153 cm
156 cm
156 cm Wide
159 cm
159 cm Wide

By entering your email address above you explicitly consent for us to hold your data in accordance with our Privacy Policy