Snowboard Type: Experimental style board with a freeride focus.
Rider Level: best suited to an intermediate to advanced rider.
Profile: C2ˣ banana technology, this hybrid profile is made up of short rocker inbetween your feet with elongated camber either side. This gives you precision riding on the slopes and float in powder.
Flex Medium flex with a rating of 6.5-7/ 10. The boards get slightly stiff as they get longer.
Board Construction: OP+construction. This construction gives you a strong board which remains lightweight.
Core: 75% Aspen and 25% paulmownia, plus a hint of cedar.
Base: Sintered base, this is a tough and fast base which is harder to maintain.
Fiberglass: Tri-Ax/ Bi-Ax glass. This gives the board stiffer sections to drive power and more flexible sections for torsional twist.
Top Sheet: Eco subllimated poly top
Sidewalls: Birch sidewalls internally run along the length of the toe and heel edge, outside of the birch runs UHMW sintered sidewalls. Whilst UHMW at the tip and tail increase impact deflection.
Edges: Magne-Traction edges are serrated to improve your edge hold, giving you better bite in icy conditions.
Nose/ Tail Width (cm)
Waist Width (cm)
Rider weight (kg)
The weight guide is low as these are the minimum weight recommended.
This board takes to powder like a fish to water. The Lost RNF board has a directional shape with a swallow tail and 2” setback, this gives the board a longer early rise nose for extra lift in the powder and a short snappy tail. Elliptical sidecuts on the tail combined with width allow you to blast down hardpack and power through powder. This shape makes this board ideal for groomers and powder.
The C2x profile stands for extreme. This is a combination between rocker and camber, the short rocker gives you float over powder and a more forgiving ride. The lengthened camber on the outside of the bindings gives you lots of pop in the nose and tail creating a more playful feel. The camber increases your stability when riding fast and straight, whilst also increasing the edge to edge transition. The original power (OP) construction has been undated with a sintered base to boost your speed, so pushing along flats and sticky snow are a thing of the past. The Lost RNF snowboard has Tri-Ax and Bi-Ax fiberglass which allows the board to have torsional flex where needed and remain responsive.
The Lost RNF uses Lib-Techs famous Magne-Traction edges, which are serrated to give you superior edge hold on hardpack snow and ice. This feature gives you the confidence to ride all terrain.
Lib-Tech boards are made in the Mervin factory in the USA. This factory is the most environmentally friendly factory which is powered with wind and water. The materials have carefully been selected to create an eco-board, made using renewable wood, low voc resin and bio topsheet. During the process of making the snowboard the Mervin factory uses water-based inks and sublimation. Plus, the final coating is no toxic, so it doesn’t run into our water streams and cause damage to the environment. It’s evident that climate change is having an impact on the mountain environment, so with a Mervin factory board to can reduce your carbon footprint whilst still enjoying a well man board which is going to give you a fun ride down the mountain.
All Mountain Freeride
Energy Efficient Reduced Waste Non Toxic
Product Sizing Chart
Subscribe to Surfdome