Lib Tech

Lib Tech Terrain Wrecker Snowboard

Multicolour

£399.45 £469.99 (Save 15%)
Choose size
  • 154cm 20SN040-NONE £399.45

    Despatched immediately

  • 157cm 20SN040-NONE £399.45

    Out of stock

  • 160cm 20SN040-NONE £399.45

    Out of stock

Product Sizing Chart

Colours

Information

Item code: 299042

The Terrain Wrecker is the snowboard from your dreams or maybe your nightmares, with a graphic that blends beauty with darkness. This board lets you take your freestyle flair and apply It across the mountain. It’s a directional twin to give you freedom in the park/ jibbing around but performance when carving down the hardpack. Built using Original Power Construction this board is lightweight, strong and has a low impact on the environment. The Terrain Wrecker features Lib Tech Magne-traction edges, several serrations along the edge ensure that you have full confidence in your edges. If you pick up a couple of dings in the mountain, don’t worry the eco base is easy to repair.

Features:
  • Snowboard type: Park, resort and backcountry
  • Snowboard ability: Intermediate to advanced
  • Shape: Directional twin shape. The twin aspect to this board gives you the freedom of be creative on the slopes, spin, jib around and ride switch. The nose is floaty whilst the tail is packed with power
  • Flex: Medium - firm flex, rated 6.5 -7/10. This flex level gives you a balance of response and forgiveness, ideal for all mountain riding
  • Profile: C2ˣ. This profile is a rocker and camber hybrid. Short rocker in the centre with elongated camber underfoot. Rocker in the centre of the board helps you to carve, improves edge hold and helps the board to float. Camber on either side adds pop to the board plus, increases your stability/ control when riding fast down the mountain
  • OP construction:
  • Core: 75% Aspen and 25% paulownia. Aspen wood keeps the core lightweight whilst paulownia is a hardwood to increase the strength
  • Fiberglass: Tri-Ax/ Bi-Ax. Bi-Ax fibreglass increases the strength of the core without effecting the flexibility, whilst Tri-Ax decreases torsional twist to create a more responsive board
  • Top sheet: Eco sublimated poly top
  • Base: Eco sublimated TNT base is a low maintenance base that retains wax well to keep you gliding faster and for longer
  • Sidewalls: Internal Birch sidewalls run along the length of the board along the toe and heel edge whilst UHMW sintered sidewalls run along the outside. These sidewalls increase the strength and response of the board. UHMW within the nose and tail deflect impact for a smoother ride
  • Magne-traction 7 serrations along the edge give you maximum edge hold on ice and hardpack snow. This edge gives you confidence going into sketchy terrain
  • Art by: Schoph

 Dimensions

 The weight guide is low to indicate the minimum weight required

Length (cm)Nose/Tail Width (cm)Waist Width (cm)Rider Weight (lbs)
15429.6/. 29.625.5100+
15730/ 3025.7110+
16031/ 3125.9120+


Eco manufacturing: Lib-Tech boards are made in the Mervin factory in the USA. This factory is the most environmentally friendly factory which is powered with wind and water. The materials have carefully been selected to create an eco-board, made using renewable wood, low voc resin and bio topsheet. During the process of making the snowboard the Mervin factory uses water-based inks and sublimation. Plus, the final coating is no toxic, so it doesn’t run into our water streams and cause damage to the environment. It’s evident that climate change is having an impact on the mountain environment, so with a Mervin factory board to can reduce your carbon footprint whilst still enjoying a well man board which is going to give you a fun ride down the mountain.

Snowboard Profile Rocker
Hybrid
Snowboard Shape Directional Twin
Snowboard Type All Mountain

Product Sizing Chart

Length (cm)
154cm
157cm
160cm

By entering your email address above you explicitly consent for us to hold your data in accordance with our Privacy Policy