Lib Tech

Lib Tech Travis Rice Pro Blunt Snowboard


£401.45 £534.99 (Save 25%)
Choose size
  • 153cm 20SN034-NONE £401.45

    Out of stock

  • 155cm 20SN034-NONE £401.45

    Out of stock

  • 157cm 20SN034-NONE £401.45

    Despatched immediately

Product Sizing Chart



Item code: 299044

A Travis Rice favourite, this board is a freestyle dream that lets you explore the whole mountain after your park session. This versatile board allows you to progress, be creative on the snow and take on challenges. Benefiting from both camber and rocker, the T-Rice Pro board gives you float in powder, edge hold for carving and pop for fun. Equipped with Horsepower Construction this board is lightweight, provides a smooth ride and is produced in a more sustainable way than most boards. Have confidence in your board because it’s fitted with Magne-traction edges, giving you maximum edge hold and control. The blunt nose is ideal for grabs in the air, plus makes the board easier to stand upright.

  • Snowboard type: All mountain/ freestyle
  • Snowboard ability: Intermediate to advanced
  • Shape: Freestyle twin with a blunt nose. This twin shape gives you complete freedom in the park, ride and land switch, hit kickers and jib around on the mountain
  • Flex: Medium - firm flex, rated 6.0 -7/10. This flex level gives you a balance of response and forgiveness, ideal for all mountain riding
  • Profile: C2. This profile is a rocker and camber hybrid. Short rocker in the centre with camber underfoot. Rocker between the bindings adds float in powder and edge hold on hardpack. Camber underfoot adds pop and power to the board, camber increases the contact length to give you maximum edge hold and stability.
  • HP construction:
  • Core: 60% aspen and 40% paulownia. Two strands of paulownia run the length of the board surrounded by aspen. This creates a lightweight yet durable core
  • Fiberglass: Tri-Ax/ Bi-Ax and Basalt. Bi-Ax fibreglass increases the strength of the core without effecting the flexibility, whilst Tri-Ax decreases torsional twist to create a more responsive board
  • Top sheet: Eco sublimated bio bean top
  • Base: Eco sintered sublimated base. This sintered base is extremely hardwearing for a longer lasting board. The pours retain wax well to keep you flying over flats for longer, so you don’t have to strap out and skate along
  • Sidewalls: Internal Birch sidewalls run along the length of the board along the toe and heel edge whilst UHMW sintered sidewalls run along the outside. These sidewalls increase the strength and response of the board. UHMW within the nose and tail deflect impact for a smoother ride
  • Magne-traction 7 serrations along the edge give you maximum edge hold on ice and hardpack snow. This edge gives you confidence going into sketchy terrain
  • Art by: Mike Parillo


The weight guide is low to indicate the minumum weight required

Length (cm)Nose/Tail Width (cm)Waist Width (cm)Rider Weight (lbs)

Eco manufacturing: Lib-Tech boards are made in the Mervin factory in the USA. This factory is the most environmentally friendly factory which is powered with wind and water. The materials have carefully been selected to create an eco-board, made using renewable wood, low voc resin and bio topsheet. During the process of making the snowboard the Mervin factory uses water-based inks and sublimation. Plus, the final coating is no toxic, so it doesn’t run into our water streams and cause damage to the environment. It’s evident that climate change is having an impact on the mountain environment, so with a Mervin factory board to can reduce your carbon footprint whilst still enjoying a well man board which is going to give you a fun ride down the mountain.

Snowboard Profile Hybrid
Snowboard Shape Twin
Snowboard Type All Mountain

Product Sizing Chart

Length (cm)

By entering your email address above you explicitly consent for us to hold your data in accordance with our Privacy Policy