Lib Tech

Lib Tech Women's Dynamiss C3 Womens Snowboard

Multicolour

£257.95 £429.99 (Save 40%)
Choose size
  • 142cm 19SN059-NONE-Mul £257.95

    Out of stock

  • 145cm 19SN059-NONE-Mul £257.95

    Out of stock

  • 149cm 19SN059-NONE-Mul £257.95

    Out of stock

  • 153cm 19SN059-NONE-Mul £257.95

    Despatched immediately

Product Sizing Chart

Colours

Information

Item code: 255259

Features:
  • Snowboard Type: All mountain freestyle snowboard which is suitable for park, resort and back country.
  • Rider Level: best suited to an intermediate to advanced rider.
  • Profile: C3 banana technology, this hybrid profile is made up of mild rocker inbetween your feet with camber either side. This gives you a aggrssion control and power.
  • Shape Directional, with a 1" set back.
  • Flexibility: Medium flex with a rating of 5-6/10. The board getting slightly stiffer as it gets longer.
  • Board Construction: OP construction. This construction gives you a strong board which remains lightweight.
  • Core: 75% Aspen and 25% paulmownia
  • Base: Eco sublimated TNT, this base is easy to maintain and hold wax well.
  • Fiberglass: Tri-Ax/ Bi-Ax glass. This gives the board stiffer sections to drive power and more flexible sections for torsional twist.
  • Top Sheet: Eco subllimated poly top
  • Sidewalls: Birch sidewalls internally run along the length of the toe and heel edge, outside of the birch runs UHMW sintered sidewalls. Whilst UHMW at the tip and tail increase impact deflection.
  • Edges: Magne-Traction edges are serrated to improve your edge hold, giving you better bite in icy conditions.

Length (cm)Nose/ Tail Width (cm)Waist Width (cm)Rider weight (kg)
14227.4/27.223.9 34+
14527.9/27.524.1 36.3+
14928.2/27.824.3 38.5+
15328.6/ 28.224.5 40.8+

 The weight guide is low as these are the minimum weight recommended. 



The Dynamiss is for the all mountain rider who loves to get deep in the POW!. The Dynamiss board is performance focused board with an aggressive edge. This board is built for an intermediate to advanced rider who pushes their riding on all terrain. The C3 profile has mild rocker between the bindings which give the board extra float in powder, whilst the camber on the outside of the bindings gives the board lots pop and a playful feel. Camber improves the board stability when riding flat and at high speeds. The blend of aspen and paulownia creates an ultra-strong snowboard, layered with Tri-Ax fiberglass it’s highly responsive to give you precision riding when tackling difficult terrain. The board is highly durable thanks to the combination of external sintered sidewalls and UHMW impact deflection at the nose and tail. If you scrape your base on loose rocks in the back country or get a ding from the park, the ECO base is low maintenance. To give you confidence across all terrain the Dynamiss uses Lib-Techs popular Magne-Traction to improve your edge hold on hardpack snow and ice.

Lib-Tech boards are made in the Mervin factory in the USA. This factory is the most environmentally friendly factory which is powered with wind and water. The materials have carefully been selected to create an eco-board, made using renewable wood, low voc resin and bio topsheet. During the process of making the snowboard the Mervin factory uses water-based inks and sublimation. Plus, the final coating is no toxic, so it doesn’t run into our water streams and cause damage to the environment. It’s evident that climate change is having an impact on the mountain environment, so with a Mervin factory board to can reduce your carbon footprint whilst still enjoying a well man board which is going to give you a fun ride down the mountain.

   
Snowboard Profile Hybrid
Snowboard Shape Directional
Snowboard Type All Mountain
Freestyle
Sustainability Reduced Waste
Energy Efficient
Non Toxic

Product Sizing Chart

Length (cm)
142cm
145cm
149cm
153cm

By entering your email address above you explicitly consent for us to hold your data in accordance with our Privacy Policy