Ride Twinpig Snowboard



Free UK delivery on orders over £30

Order by 9pm for Next Day Delivery

Extended free returns until 15th Jan 2023

Choose size
  • 142 cm 12G0007.1.1.142-Design £414.95

    Out of stock

  • 148 cm 12G0007.1.1.148-Design £414.95

    Out of stock

  • 151 cm 12G0007.1.1.151-Design £414.95

    Out of stock

  • 154 cm 12G0007.1.1.154-Design £414.95

    Despatched immediately

  • 156 cm Wide 12G0007.1.W.156-Design £414.95

    Out of stock

  • 157 cm 12G0007.1.1.157-Design £414.95

    Out of stock

Product Sizing Chart



Item code: 433046

The Twinpig board is back this year, and it is better than ever. The Twinpig board is built to the same specification of the Warpig however it uses a twin shape to increases the versatility for freestyle focused riders. Although this board is shaped as a twin it uses a directional sidecut to help initiate turns on your heel side and control on your edges. Featuring Slim Wall technology to help transfer energy efficiently, add damping underfoot and keep the weight to a minimum. RIDE recommend that you buy the size 3 – 6 cm shorter than your usual twin board to benefit from its shape and profile.

  • Snowboard Type: All Mountain, Park and Powder
  • Ability Level: Suitable for all abilities
  • Shape: Asymmetrical Twin
  • Profile: Twin Standard Camber
  • Response: Mellow flex
  • Construction:
  • Core: Performance
  • Fiberglass: Hybrid
  • Laminates: Double Impact Plates
  • Top Sheet: Standard Topsheet
  • Base: Sintered and Stone Finish
  • Sidewalls: Slimewalls and Roll-in Construction
  • Sidecut: Asymmetrical Quadratic
  • Edge: Cleave Edge Steel

Asymmetrical Twin: The technology in the Twinpig is symmetrical however the sidecut are asymmetrical

Twin Standard Camber : Camber between the inserts with large rocker zones outside of the inserts. Camber provides quick edge to edge transitions, power and pop whilst rocker helps you initiate turns and float over powder

Performance Core: This core combines tough Aspen with poppy Bamboo and lightweight Paulownia. As a result, the performance core is a blend of strength and weightlessness

Hybrid Fiberglass: This fiberglass gives you the benefits of both Biaxial and Triaxial. Triaxial above the core increases the stiffness and response whilst Biaxial allows torsional twist

Double Impact Plates: Two impact plates sit under the two binding zones; these large plates reinforce the board in the highest impact zones. The large size suits a wide range of stance widths

Standard Topsheet: Double Urethane topsheet material with bold RIDE graphics

Sintered Base: High-end sintered 4000 Ptex base is extremely hard to increase the lifespan of the board. Although this base is harder to maintain if you pick up any dings it is must faster than an extruded base

Slimewalls: Exclusive to RIDE Slimewalls are made with Urethane which absorbs impact creating a smoother ride. Slimewalls are effect when riding over snow, metal or wood, perfect for hitting the park for a few laps. Slimewalls one of the most durable sidewalls available

Roll-in Construction: To increase durability and prevent chips the roll-in construction wraps around the sidewalls. This feature comes in handing when heading to the park for some fun on rail and boxes

Quadratic Sidecut: This directional sidecut with a Quadratic curvature runs from the top of the rear insert progressing to a linear section at the tail. This Quadratic sidecut helps you initiate turns smoothy without catching an edge whilst also providing support through the turn exit

Length (cm)Effective Edge (mm)Nose/Tail Width (cm)Waist Width (cm)Suggested Weight (kg)
142104729.8 / 29.825.027-59
148108530.7 / 30.725.745-79
151111031.4 / 31.426.359-86
154112332.0 / 32.026.863-90
156W113632.8 / 32.827.577-100+
157114832.3 / 32.327.073-100+

Snowboard Profile Camber
Snowboard Shape Twin
Snowboard Type All Mountain

Product Sizing Chart

Length (cm)
142 cm
148 cm
151 cm
154 cm
156 cm Wide
157 cm

By entering your email address above you explicitly consent for us to hold your data in accordance with our Privacy Policy