FCS

FCS II Carver Neo Glass Quad Rear Fin

Lime

CA $43.95
Small / 55 - 70 kg Despatched immediately Product Sizing Chart
Product Sizing Chart

Only 5 left in stock

Colours

Information

Item code: 137219

These Quad Rears have a 50/50 foil, so they are suited to quad sets which have the rear boxes set close to the stringer of the board.

Neo Glass.

These fins are designed to work with the FCS II carver side fins from the thruster set, they are supplied as two fins to go in the rear fin plugs of a quad set-up.

OVERVIEW

  • Elongated fin for performing long arc turns.
  • High degree of sweep angle provides exceptional control off the bottom and when carving on the open face.
  • Designed for power surfers who like to push hard against their fins and draw out their turns.

IDEAL CONDITIONS

Open face, down-the-line waves, particularly good in point and reef breaks.

BOARD TYPES

Recommended for boards with deep concaves and moderate-to-extreme rocker.

*Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.

How Many fins?

This is supplied as a set of two fins.

Fin Size:

FCS give each fin a size rating, each size has a recommended rider weight range, so you can easily work out whether a set of fins is going to be a good size for you.

  • Small fins are designed for a rider weight range of: 55kg - 70kg
  • Medium fins are designed for a rider weight range of: 65kg - 80kg
  • Large fins are designed for a rider weight range of: 75kg - 90kg

Dimensions:

Medium fins

  • Base: 4.14" / 105mm
  • Depth: 4.21" / 107mm
  • Area: 12.63"² / 8150mm²
  • Sweep: 33.2º
  • Foil: 50/50

Material

Neo Glass

The performance of Neo Glass fins can be attributed to number of key features:

THE FCS II SYSTEM

The FCS II system has been designed to perform at the highest level by seamlessly connecting the three essential elements in surfing; the surfer, the surfboard and the fins. The new system boasts a number of key advantages over its predecessors. Firstly, the need for any screws or tool to secure the fins has been eliminated; the fins now simply lock into the plugs.

Secondly, the leading edge of the fin resides inside the plug, and the base of the fins sit flush to the surface of the board creating a more seamless connection. The final key feature of the new system is that it’s backward compatible, meaning it will accept fins from the original dual tab system. Adding two grub screws and a small silicon insert allows you to secure your two tab fins into the new system.

When paired with fins from the new FCS II Essential Series, it’s now possible to install and remove your fins in seconds. What you’ll find when you ride the new FCS II system is more speed, drive, acceleration, and most importantly more response from your board, and that equates to better surfing!

Our team riders have given the new FCS II system their personal tick of approval, which is validation from the best surfers on the planet.

Fin Construction Neo Glass
Fin Options Quad Rears
Specialist Fins
Fin Set Up Quad Rear
Fin System FCS II

Product Sizing Chart

Size (Unisex) Recommended Rider Weight (kg)
Small 55 - 70 kg

By entering your email address above you explicitly consent for us to hold your data in accordance with our Privacy Policy