Lib Tech

Lib Tech Travis Rice Orca Snowboard

Multicolour

CA $846.30
Choose size
  • 144cm 20SN044-NONE CA $846.30

    Despatched immediately

  • 147cm 20SN044-NONE CA $846.30

    Despatched immediately

  • 150cm 20SN044-NONE CA $846.30

    Despatched immediately

  • 153cm 20SN044-NONE CA $846.30

    Despatched immediately

  • 156cm 20SN044-NONE CA $846.30

    Despatched immediately

  • 159cm 20SN044-NONE CA $846.30

    Despatched immediately

Product Sizing Chart

Colours

Information

Item code: 299030

The partnership between Lib Tech and Travis Rice has proven to be a great one but throw into the mix the Orca Conservancy organisation you have an awesome snowboard that’s contributing to the extinction prevention of orca whales. A proportion of the sales from this board are donated to the Orca Conservancy organisation #betheirvoice.

This beast of a snowboard is built to charge across the whole mountain and perform in powder. It’s directional shape with a floaty nose makes it the perfect partner for freeride boarding. With a wider waist then a regular snowboard you can ride it shorter and get the same performance. The HP construction on this board ensure that it remains lightweight and gives you a smooth ride. It wouldn’t a Lib Tech board without Magne-traction edges, giving you increased control and edge hold. Finished with a sintered base this board is the fasted fish on the mountain.

Features:
  • Snowboard type: Resort and backcountry
  • Snowboard ability: Intermediate to advanced
  • Shape: Direction shape with a tapered tail and 2- 2.5” set back. This board has a floaty nose for powder and a powerful tail
  • Flex: Medium - firm flex, rated 7/10. This flex level gives you a balance of response and forgiveness, ideal for all mountain riding
  • Profile: C2ˣ. This profile is a rocker and camber hybrid. Short rocker in the centre with elongated camber underfoot. Rocker in the centre of the board helps you to carve, improves edge hold and helps the board to float. Camber on either side adds pop to the board plus, increases your stability/ control when riding fast down the mountain
  • HP construction:
  • Core: 60% aspen and 40% paulownia. Two strands of paulownia run the length of the board surrounded by aspen. This creates a lightweight yet durable core
  • Fiberglass: Tri-Ax/ Bi-Ax and Basalt alloy. Bi-Ax fibreglass increases the strength of the core without effecting the flexibility, whilst Tri-Ax decreases torsional twist to create a more responsive board
  • Top sheet: Eco sublimated bio bean top
  • Base: Sintered knife cut base. This sintered base is extremely hardwearing for a longer lasting board. The pours retain wax well to keep you flying over flats for longer, so you don’t have to strap out and skate along
  • Sidewalls: Internal Birch sidewalls run along the length of the board along the toe and heel edge whilst UHMW sintered sidewalls run along the outside. These sidewalls increase the strength and response of the board. UHMW within the nose and tail deflect impact for a smoother ride
  • Magne-traction 7 serrations along the edge give you maximum edge hold on ice and hardpack snow. This edge gives you confidence going into sketchy terrain
  • Art by: Mike Parillo

 Dimensions

 Ride this board 3 - 6cm shorted than your normal board  

Length (cm)Nose/Tail Width (cm)Waist Width (cm)Rider Weight (lbs)
14430.1/ 29.125.5100+
14730.3/ 29.325.7110+
15031.3/ 30.426.5120+
15331.6/ 30.526.7130+
15631.7/ 30.626.7140+
15931.9/ 30.826.7150+ 

The weight guide is low to indicate the minimum weight required



Eco manufacturing: Lib-Tech boards are made in the Mervin factory in the USA. This factory is the most environmentally friendly factory which is powered with wind and water. The materials have carefully been selected to create an eco-board, made using renewable wood, low voc resin and bio topsheet. During the process of making the snowboard the Mervin factory uses water-based inks and sublimation. Plus, the final coating is no toxic, so it doesn’t run into our water streams and cause damage to the environment. It’s evident that climate change is having an impact on the mountain environment, so with a Mervin factory board to can reduce your carbon footprint whilst still enjoying a well man board which is going to give you a fun ride down the mountain.

Snowboard Profile Hybrid
Rocker
Snowboard Shape Directional
Snowboard Type All Mountain
Freeride

Product Sizing Chart

Length (cm)
144cm
147cm
150cm
153cm
156cm
159cm

By entering your email address above you explicitly consent for us to hold your data in accordance with our Privacy Policy