Lib Tech

Lib Tech Dynasword Kids Snowboard

Multicolour

ILS1119.38
Choose size
  • 130cm 20SN037-NONE ILS1119.38

    Out of stock

  • 135cm 20SN037-NONE ILS1119.38

    Despatched immediately

  • 140cm 20SN037-NONE ILS1119.38

    Out of stock

Product Sizing Chart

Colours

Information

Item code: 299035

This is the go-to board for little rippers who destroy the whole mountain. Take it to the park to learn new tricks, race your mates down the piste and find some fresh lines in the backcountry. With a blend of mild rocker and camber this board floats over powder and has lots of pop and power for freestyle. This profile is slightly more aggressive to provide you with control and precision. The original power construction creates a board that is lightweight, strong and has been manufactured using eco-friendly materials and methods. You don’t need to worry about slipping out because the Dynasword has Magne-traction edges which bite into ice and hardpack.

Features:
  • Snowboard type: All mountain/ freeride
  • Snowboard ability: Intermediate - advanced
  • Shape: Directional shape. Featuring a low entry directional nose, tapered tail and a 1" set back
  • Flex: Medium flex, rated 5.5-6/10. This flex level gives you a balance of response and forgiveness, ideal for all mountain riding and hitting the park
  • Profile: C³amber. This is an aggressive profile made with mild rocker in the centre with camber underfoot. Mild rocker increases your edge hold and helps the board to float over powder, whilst full camber adds pop, power and stability
  • OP construction:
  • Core: 75% Aspen and 25% paulownia. Aspen wood keeps the core lightweight whilst paulownia is a hardwood to increase the strength
  • Fiberglass: Tri-Ax/ Bi-Ax. Bi-Ax fibreglass increases the strength of the core without effecting the flexibility, whilst Tri-Ax decreases torsional twist to create a more responsive board
  • Top sheet: Eco sublimated poly top
  • Base: Eco sublimated TNT base is a low maintenance base that retains wax well to keep you gliding faster and for longer
  • Sidewalls: Internal Birch sidewalls run along the length of the board along the toe and heel edge whilst UHMW sintered sidewalls run along the outside. These sidewalls increase the strength and response of the board. UHMW within the nose and tail deflect impact for a smoother ride
  • Magne-traction 7 serrations along the edge give you maximum edge hold on ice and hardpack snow. This edge gives you confidence going into sketchy terrain
  • Art by: Aron Fredriksson

 Dimensions

Length (cm)Nose/Tail Width (cm)Waist Width (cm)Rider Weight (lbs)
13026.4 / 26.223.550+
13526.9 /26.723.760+
14027.4 / 27.223.970+

The weight guide is low to indicate the minimum weight required 



Eco manufacturing: Lib-Tech boards are made in the Mervin factory in the USA. This factory is the most environmentally friendly factory which is powered with wind and water. The materials have carefully been selected to create an eco-board, made using renewable wood, low voc resin and bio topsheet. During the process of making the snowboard the Mervin factory uses water-based inks and sublimation. Plus, the final coating is no toxic, so it doesn’t run into our water streams and cause damage to the environment. It’s evident that climate change is having an impact on the mountain environment, so with a Mervin factory board to can reduce your carbon footprint whilst still enjoying a well man board which is going to give you a fun ride down the mountain.

Snowboard Profile Hybrid
Snowboard Shape Directional
Snowboard Type All Mountain
Freeride

Product Sizing Chart

Length (cm)
130cm
135cm
140cm

By entering your email address above you explicitly consent for us to hold your data in accordance with our Privacy Policy