Item code: 141793
It's every surfers dilemma, particularly when the waves are small or weak: you want to get in the water, you want to catch waves, you need the board to help you generate speed BUT you still want to be able to lay it on a rail and throw a little spray.The trend for super fat shortboards has created a lot of fun shapes for surfers of all levels, but unless you're a WCT contender their fat tails can be hard to control properly rail to rail once you do get the board moving. The Maluku Flying Frog solves this problem by creating something of cut and shut; The front end is similar to a traditional egg or even minimal, but the tail is all rounded pin shortboard. You paddle in early and easy on that reassuring front end foam, pump through on your front foot on that wide, stable middle section and when you're ready weight the back foot and put the board on rail exactly as you would with a shortboard - the rounded pin tail gives control through the turn in gutless waves or hold AND control in larger surf. As a result the board lends itself perfectly to the surfer starting out and looking for an easy route to a decent shortboard surfing style, perhaps before stepping down to a proper shortboard - or the shortboarder looking to keep their rail work tight on days without enough grunt for their standard stick. Enjoy the glide and smooth style of a single fin, add side bites for a bit more drive or ditch the centre fin and opt for the speed and hold on rail of a quad setup.
Entropy Resins makes thermoset epoxy systems for a new generation of products. Products that not only perform, but also take a crucial step towards lowering our impact on the environment.
Our Super Sap line of epoxy resin products cover a wide range of applications and manufacturing processes. Whether you are a large manufacturer or a do-it-yourselfer, we have a system that's right for you. From high performance composites to green building materials, Super Sap is the answer!
Make things better
Reduce your carbon footprint. By employing green chemistry techniques that require less energy and produce less harmful by-products, we reduce the greenhouse gas emissions from production of our resins by 50% over conventional petroleum based epoxies. Using today's modern Life Cycle Analysis techniques we can demonstrate how our resins can help your products reduce their environmental impact.
Sustainability by shared bio mass pipeline
Not all carbon is created equal. We replace petroleum based carbon with renewable plant-based carbon. The raw materials going into our resins are co-products or waste products of other industrially important processes. These materials do not compete with food sources or displace food-based agriculture. Using an international standard method of radio carbon dating, we verify the renewable content of the resins so you know exactly where they come from.
|5'10||20 3/4"||2 5/8"||35|
|6'4||21 1/4"||2 13/16"||42.5|
|6'10||21 1/2"||2 7/8"||48|
|7'2||21 3/4"||2 15/16"||51|
|Fin Set Up||2+1|
|Fin Set Up||Single|
|Fin Set Up||Quad|
|Fin System||FCS II|
|Surfboard Construction||EPS Epoxy|
|Surfboard Tail Shape||Rounded Pin|
|Surfboard Types||Mini Mals|
- Colour: Green White