Lib Tech

Lib Tech Travis Rice Pro Pointy Snowboard

Multicolour

TWD16893.16
Choose size
  • 159.5 cm 20SN035-NONE TWD16893.16

    Despatched immediately

  • 161.5cm 20SN035-NONE TWD16893.16

    Despatched immediately

  • 164.5 cm 20SN035-NONE TWD16893.16

    Out of stock

Product Sizing Chart

Colours

Information

Item code: 299045

This highly versatile board is one of Travis Rice favourites, it allows you to add a freestyle flair across the mountain. One of the standout features on this board is the pointy tips, helping the board to cut through powder. With a hybrid profile and twin shape this board performs on all terrain and in any direction. Carve on the hardpack, have fun in the park with lots of pop or create fresh lines in the back country. With Horsepower Construction this snowboard is lightweight, strong and creates a smooth feeling when riding, but above all this construction is environmentally friendly. No lib-Tech board could be without Magne-traction edge, these serrated edges give you maximum edge hold and control to you can enjoy the ride.

Features:
  • Snowboard type: All mountain/ freestyle
  • Snowboard ability: Intermediate to advanced
  • Shape: Freestyle twin with a pointy freeride nose. This twin shape gives you complete freedom in the park, ride and land switch, hit kickers and jib around on the mountain
  • Flex: Medium - firm flex, rated 7/10. This flex level gives you a balance of response and forgiveness, ideal for all mountain riding
  • Profile: C2. This profile is a rocker and camber hybrid. Short rocker in the centre with camber underfoot. Rocker between the bindings adds float in powder and edge hold on hardpack. Camber underfoot adds pop and power to the board, camber increases the contact length to give you maximum edge hold and stability.
  • HP construction:
  • Core: 60% aspen and 40% paulownia. Two strands of paulownia run the length of the board surrounded by aspen. This creates a lightweight yet durable core
  • Fiberglass: Tri-Ax/ Bi-Ax and Basalt. Bi-Ax fibreglass increases the strength of the core without effecting the flexibility, whilst Tri-Ax decreases torsional twist to create a more responsive board
  • Top sheet: Eco sublimated bio bean top
  • Base: Eco sintered sublimated base. This sintered base is extremely hardwearing for a longer lasting board. The pours retain wax well to keep you flying over flats for longer, so you don’t have to strap out and skate along
  • Sidewalls: Internal Birch sidewalls run along the length of the board along the toe and heel edge whilst UHMW sintered sidewalls run along the outside. These sidewalls increase the strength and response of the board. UHMW within the nose and tail deflect impact for a smoother ride
  • Magne-traction 7 serrations along the edge give you maximum edge hold on ice and hardpack snow. This edge gives you confidence going into sketchy terrain
  • Art by: Mike Parillo

 Dimensions

The weight guide is low to indicate the minimum weight required

Length (cm)Nose/Tail Width (cm)Waist Width (cm)Rider Weight (lbs)
159.530.2/30.225.9125+
161.530.4/30.426130+
164.531/3126.2140+


Eco manufacturing: Lib-Tech boards are made in the Mervin factory in the USA. This factory is the most environmentally friendly factory which is powered with wind and water. The materials have carefully been selected to create an eco-board, made using renewable wood, low voc resin and bio topsheet. During the process of making the snowboard the Mervin factory uses water-based inks and sublimation. Plus, the final coating is no toxic, so it doesn’t run into our water streams and cause damage to the environment. It’s evident that climate change is having an impact on the mountain environment, so with a Mervin factory board to can reduce your carbon footprint whilst still enjoying a well man board which is going to give you a fun ride down the mountain.

Snowboard Profile Rocker
Hybrid
Snowboard Shape Twin
Snowboard Type All Mountain
Freestyle

Product Sizing Chart

Length (cm)
159.5 cm
161.5cm
164.5 cm

By entering your email address above you explicitly consent for us to hold your data in accordance with our Privacy Policy